
Short girth in neoprene and calfskin
The OriginalA neoprene core, a full-grain calfskin cover and a nylon reinforcement against stretching. For Freeform Classic and Scout Extreme, from 55 to 75 cm.
Which length to choose.
Five sizes, in 5 cm steps. If you don't know yours, here is how to measure.
Pick a size to see it on the drawing.
Diagram: only the lengths are in proportion
If you don't know your size
- 01
Saddle in place.
On the horse, with its saddle pad and with the billets attached where you use them.
- 02
Hole to hole.
Run a tape measure under the belly, along the girth groove, from the middle hole of one billet to the middle hole of the other. That number is the length.
- 03
Check the buckles.
With the girth done up, the buckles should sit about 3–4 inches (8–10 cm) above the elbow, clear of the movement.
Already have a short girth that works? Measure it laid flat, from end to end: that is how the length is taken on the drawing. The manufacturer states the length, not the points it is taken from: if you fall between two sizes, ask us.
Compatibility
Classic and Scout Extreme.
- ClassicFitsEnglish line. Fast Change as standard: three D-rings and removable billets.
- Scout ExtremeFitsWestern line. Centerfire rigging as standard.
The Freeform catalogue describes English-style billets that accept a dressage girth with two buckles: this one has two at each end. For other Freeform models the manufacturer states nothing: ask us before ordering.
Two sides, with neoprene inside.
The neoprene is the core and stays out of sight. On one side the smooth calfskin, towards the horse; on the other the nylon bands and the buckles.
Full-grain calfskin
The side towards the horse and the edges. The ends are bound in fabric.
Soft leather with its full grain. It is the part that touches the horse, and the one that needs the most care.

Neoprene
Inside, under the cover.
Expanded synthetic rubber, elastic: it gives the girth body and softness.
Nylon
The two bands on the outer side, from buckle to buckle.
The reinforcement against stretching, according to the manufacturer.

Stainless steel
Four buckles, two at each end.
The manufacturer describes them as resistant to pulling and corrosion.

D-ring
At the centre of the outer side, under the tag.
The central loop the manufacturer lists, for attaching accessories.

Details in Black
Two materials, one cloth.
Never in the washing machine.
Calfskin
Damp cloth, then a product made for leather.
Neoprene
It sits under the cover: the manufacturer still specifies a product made for neoprene.
Nylon and buckles
Damp cloth, and dry the buckles before storing it.
After work
Remove the sweat while it is fresh and let it air-dry, away from heat sources.
If the leather gets wet
Remove the dirt with a damp cloth before it dries, and apply a conditioner while the leather is still damp. The Freeform catalogue advises this for the saddle's leather.
Frequently asked questions
Products available from the catalogue are shipped within 2–4 working days of order confirmation. You receive an email with the tracking number as soon as the parcel leaves.
For catalogue products you have the right to withdraw within 14 days of receipt, returning the item undamaged and in its original packaging. You bear the cost of sending it back, unless it is faulty or not what you ordered. Write to atelier@equirea.it with your order number and the reason, and you will get the return instructions.
Consumer purchases carry the two-year legal guarantee of conformity set out by European law. The atelier's own terms and its exclusions are described on the Guarantee page.
