Skip to content
Easy Fit stirrup leathers for Freeform Classic — Black

Easy Fit stirrup leathers

FreeformThe Original
€132.00For Freeform Classic · Made in Italy

Full-grain calfskin with a nylon core and a T-hook closure. They fix with hook-and-loop under the seat of the Freeform Classic, wherever you need them.

ColourLength, cm
Black
Black/Nabuck 5020
Dark Brown
Chocolate
Cognac · sold out
Brick Red · sold out
AvailableSold outThe cell colours are approximate.

There is no 55 in the range: it goes from 50 to 60.

How to choose the length
1

They don't hang from a bar: they fix under the seat.

The Freeform has no tree, so it has no bars for an ordinary stirrup leather to hang from. Here a single hook-and-loop attachment carries both leathers and fixes to the top of the base, under the seat. The manufacturer states two benefits: the position can be adjusted, and there is less thickness under the leg.
From above, seat off5← PommelCantle →In profile1234
Diagram, not to scale
  1. 1Hook-and-loop attachment
  2. 2D-ring
  3. 3Stirrup leather
  4. 4Seat, dashed
  5. 5Top of the base
Where to put it

The attachment does not click into three notches: it moves in small steps, until shoulder, hip and heel line up. If your leg swings forward, move it back; if your leg swings back, move it forward.

Take off the seat, lift the attachment, reposition it, refit the seat. No tools. There is one attachment, so both leathers move together.

These are adjustments, not variants: position is not something you order.

Measure the length on your own saddle.

The manufacturer gives the lengths, but no rule for choosing them, and does not say from where to where its centimetres are measured. Start from a measurement of your own.
1234
  1. 1Attachment
  2. 2The hole where the T-hook closes
  3. 3Stirrup eye
  4. 4The measurement to take
  1. 01

    With the stirrup at the height you ride, measure from the lowest point of the seat to where the leather turns in the stirrup eye. If you already have a Freeform, start from the attachment's ring.

  2. 02

    Leave some margin: the leather has to reach the stirrup, go round it and come back up to a hole. The holes make it shorter, not longer.

  3. 03

    Don't compare the length of your own leathers. A traditional leather runs double from the bar and has much higher numbers: what counts is the distance from saddle to stirrup.

Compatibility

For the Classic.

The manufacturer lists them for the Freeform Classic: the saddle in the attachment drawing.
  • ClassicFitsThe attachment fixes to the top of the base, under the seat.
  • Classic DKRFitsIn the catalogue it is a Classic base, with interchangeable rolls: the manufacturer does not name it separately.

For the other Freeform saddles the manufacturer does not list them. Write to us before ordering.

Calfskin outside, nylon inside.

The manufacturer states the calfskin and the nylon core, without percentages. The other parts can be recognised from the photos.
  1. Full-grain calfskin

    Calfskin with its whole surface intact: the natural grain shows and gains character over the years.

  2. Nylon core

    It sits inside the leather and does not show. The manufacturer states that it resists stretching: leather alone, under load, tends to give.

  3. T-hook closure and holes

    A T-shaped stud goes into the holes and closes the leather, in place of a buckle.

  4. Elastic keeper

    Holds the part coming back up from the stirrup in place.

  5. D-rings

    Connect each leather to the attachment. The Freeform catalogue states stainless steel for the rings on its saddles.

  6. Hook-and-loop attachment

    Included. It is the part that fixes to the base, under the seat.

On Black/Nabuck 5020 the manufacturer does not say which part is nubuck.

The pair of stirrup leathers in Black laid flat, with the hook-and-loop attachment and the two D-rings at the top
Close-up of the T-shaped stud, the elastic keeper and the holes, in Black
The T-hook, the keeper and the holes, in Black

How to look after them.

If they get wet, remove the dirt and apply the product while they are still damp: the Freeform catalogue advises this for the leather of the saddle. Keep the hook-and-loop clean: full of hair it loses grip, and you comb it out with a soft wire brush.

Step by step

  1. 01

    Wipe with a damp cloth

  2. 02

    Products made for leather

Avoid

  • Do not machine wash

Frequently asked questions

Products available from the catalogue are shipped within 2–4 working days of order confirmation. You receive an email with the tracking number as soon as the parcel leaves.

For catalogue products you have the right to withdraw within 14 days of receipt, returning the item undamaged and in its original packaging. You bear the cost of sending it back, unless it is faulty or not what you ordered. Write to atelier@equirea.it with your order number and the reason, and you will get the return instructions.

Consumer purchases carry the two-year legal guarantee of conformity set out by European law. The atelier's own terms and its exclusions are described on the Guarantee page.