Skip to content
Freeform saddle panels in suede/Sympa — Black

Panels in suede and Sympa

FreeformThe Original
€138.00
For every Freeform except the Western All Round · Made in Italy

Two panels that fix with hook-and-loop under the Freeform base, one on each side. Each one opens like a pocket, to change the padding or add shims.

ColourBlack
Size
Which size to choose
1

One panel each side, the spine in between.

The Freeform has no tree: the base is a flexible foam that follows the back. The panels go underneath, on either side of the spine, and a channel stays open between them.

This is how the base is fitted to one particular horse. A pad with a spine channel is still needed.

The manufacturer recommends them for

  • Horses with a pronounced spine or withers
  • Riders over 80 kg
  • Long distances
A Freeform saddle upside down with the two panels fixed under the base: a hand in the channel between them measures the gap with three fingers
From the Freeform catalogue: the right distance between the two panels. The saddle is not included.

They attach where the horse needs them.

  1. There is hook-and-loop under the base

    The panels fix there, with no tools. Bases configured on Equirea come with it as standard.

  2. Three fingers between them

    In the channel, at the withers, there should be room for a tight three fingers: that is the distance the Freeform catalogue gives.

  3. Each side on its own

    From the stirrup area to the pommel, the position changes from one horse to the next. Peel them off and press them back on until it is right, even if left and right end up different.

It opens like a pocket.

Along the straight edge, the one facing the spine, there is a hook-and-loop flap. Inside sit two step-rubber inserts, and that is where you change them or add shims.

An open panel seen from the side: the hook-and-loop flap lifted and, inside, two light blue inserts one on top of the otherAn open panel seen from the side: the hook-and-loop flap lifted and, inside, two light blue inserts one on top of the other
An open panel, in Black: the hook-and-loop flap and the two standard inserts.
Towards the saddleTowards the horse123456
Diagram, not to scale
  1. Saddle base

    Not included. Its hook-and-loop is the fixing point.

  2. Suede

    The face towards the saddle, around the patch.

  3. Hook-and-loop patch

    This is what fixes to the base.

  4. Hook-and-loop flap

    Closes the pocket along the straight edge.

  5. Two step-rubber inserts

    Standard equipment.

  6. Sympa

    The ribbed face, towards the horse.

Two different shoulders, two different thicknesses.

Many horses are not the same left and right. That is what shims are for: you add height only on the side that needs it, and take it out when it is no longer needed.

The two inserts come as standard; extra shims are not included. How much to add is best decided with whoever looks after the horse.

Suede on one side, Sympa on the other.

These are not two versions to choose between: every panel has both. You choose the colour and the size.

The suede of a panel, with the edge of the hook-and-loop patch

Suede

On the face towards the saddle, around the hook-and-loop.

What it is
Leather with a velvety surface.
What it does
The Freeform catalogue cites it for looks and durability.
Close-up of the ribbed Sympa of a panel

Sympa

On the face towards the horse, ribbed.

What it is
A technical microfibre with no materials of animal origin. The Freeform catalogue calls it Sympanova.
What it does
It covers the panel: the Freeform catalogue states an additional cushioning effect.

Inside, two step-rubber inserts: the Freeform catalogue describes them as double-layer anti-shock foam.

These two photos show Black.

Compatibility

On all but the Western.

The Western All Round has its own.
  • ClassicFitsStandard or short back: the size follows the length of the base.
  • Classic DKRFitsThe Classic with interchangeable rolls: same panels.
  • PathfinderFitsThe standard hook-and-loop covers the whole panel area.
  • Scout ExtremeFitsThe configurator offers it with these panels.
  • Western All RoundDoes not fitThe Freeform catalogue gives it its own removable panels: a different item.

In the Freeform catalogue and the configurator they are called Enduro panels. If your Freeform did not come from us, look under the base: the catalogue lists the hook-and-loop as an option, and without it the panels have nothing to fix to.

The size follows the base.

You do not choose it on the horse: you look at the length of the base. Standard base (22″), standard panels. Short back base (20″), Short Back panels.
Standard · 56 cmShort Back · 53 cm
The same outline at the two lengths

Choose a row.

The lengths are from the Freeform catalogue. For the extra-short back base the catalogue has a third size, XSB at 51 cm, which this item does not come in.

By hand, never in the machine.

The rubber is in the inserts: you reach them by opening the panel.

Do

  • Wipe with a damp cloth
  • Products made for suede
  • Products made for rubber

Avoid

  • Do not machine wash

Frequently asked questions

Products available from the catalogue are shipped within 2–4 working days of order confirmation. You receive an email with the tracking number as soon as the parcel leaves.

For catalogue products you have the right to withdraw within 14 days of receipt, returning the item undamaged and in its original packaging. You bear the cost of sending it back, unless it is faulty or not what you ordered. Write to atelier@equirea.it with your order number and the reason, and you will get the return instructions.

Consumer purchases carry the two-year legal guarantee of conformity set out by European law. The atelier's own terms and its exclusions are described on the Guarantee page.

From the same category

See the whole category